Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Kenneth on August 14, 2014, 11:27:46 AM
-
i'm using mach3 r3.043.066.
it never ask me to save fixture. i tried with the option "optional offset save"
checked and un-checked. i created a button(122) so i can save it but would like
to make a safety so it would ask when i close.
Thanks !
-
Check Optional Offset Save.
Close and Restart Mach3.
Zero an axis. (that's not already zero)
Close Mach3.
You should see the message to save.
-
that didn't show the option to save.
it does show to end session.
Thanks
-
Attach your xml and I will take a look and see if I can replicate your issue.
Hood
-
Thanks !
-
thanks again Hood !
-
still having the problem. what do i look for in the xml file ?
did i attach the correct file ? should i START from scratch
or is it also part of machscreen(1.60) ?
Thanks for any help !
-
i fixed it by deleting the xml file and reopening mach3 and then loading my set file.
it ask to save fixture but doesn't really save position. is there something else i can
do ? Thanks !
-
am i asking REALLY dumb questions ?
BESIDES this one.
-
Please don't tell me i can't get help cause i don't like M4 ?
-
When you have an issue that nobody else has, then nobody will have an answer.
I'd first try deleting your .xml file and creating a new one. If that doesn't work, I'd uninstall Mach3, and then reinstall and see if that works.
-
Sorry. Thanks Gerry !
-
Try the persistent dro checkbox. In general settings tab
Alan