Hello Guest it is April 23, 2024, 06:55:27 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Slaved Axis Moves Wrong Direction When Homing  (Read 2027 times)

0 Members and 1 Guest are viewing this topic.

Offline HimyKabibble

*
  • 1,687 1,687
    • View Profile
Slaved Axis Moves Wrong Direction When Homing
« on: August 03, 2014, 10:48:21 PM »
A friend of mine just bought a CNC router, which has a slaved axis on the gantry.  All works perfectly when jogging, but when homing, the two slaved motors move opposite directions.  What settings can cause that?

Regards,
Ray L.
Logged
Regards,
Ray L.

Offline ger21

*
  • *
  • 6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Slaved Axis Moves Wrong Direction When Homing
« Reply #1 on: August 04, 2014, 07:29:32 AM »
Home negative in Config>Homing. Make sure both are the same.

If they are the same, then one axis is backwards, and he needs to reverse it.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html

Offline HimyKabibble

*
  • 1,687 1,687
    • View Profile
Re: Slaved Axis Moves Wrong Direction When Homing
« Reply #2 on: August 04, 2014, 11:49:04 AM »
Gerry,

Thanks, I'll have him give that a try.

Regards
Ray L.
Logged
Regards,
Ray L.
Pages: 1   Go Up
« previous next »