Hello Guest it is March 28, 2024, 08:47:35 PM

Author Topic: Mach3 wizard problem  (Read 2366 times)

0 Members and 1 Guest are viewing this topic.

Offline djk

*
  •  13 13
    • View Profile
Mach3 wizard problem
« on: April 17, 2014, 04:05:36 PM »
Hi

I had a old Demo mach3, every thing worked well. I updated and brought a license, now I have a problem with the wizards- cut circle - kiran.
First thing, when I have X center and Y center 0 the center is off to the side and the finish pass is off center. Second thing is circle Dia and tool Dia are wrong. I have to change these to circle radius and tool radius to get the right size circle.
If some one can help.

Thanks David

« Last Edit: April 17, 2014, 04:17:51 PM by djk »

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 wizard problem
« Reply #1 on: April 17, 2014, 05:27:57 PM »
You have the IJ mode set wrong, go to General Config and change it to Inc.
Hood

Offline djk

*
  •  13 13
    • View Profile
Re: Mach3 wizard problem
« Reply #2 on: April 18, 2014, 06:40:06 AM »
Thanks Hood everything is working fine now.

David