Hello Guest it is March 28, 2024, 10:50:07 AM

Author Topic: The image gets flipped (mirror)  (Read 2505 times)

0 Members and 1 Guest are viewing this topic.

The image gets flipped (mirror)
« on: January 02, 2014, 06:17:07 AM »
Hi,

I'm new at this...
I have a problem with a picture that should be pointed to the left but when the Mach3 has done it's job it is pointing to the right?

Why? Can you tell me exactly how I can make it work right?

Thanks!

Finland
Re: The image gets flipped (mirror)
« Reply #1 on: January 02, 2014, 07:03:41 AM »
Finland,
It sounds as though your X axis (left/right) may be operating reversed.  Try reversing the Dir LowActive setting in Ports and Pins.
Regards,
John Champlain
Re: The image gets flipped (mirror)
« Reply #2 on: January 02, 2014, 09:48:27 AM »
Okay...

It's now on a number 1 should it be -1?

Thanx..

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: The image gets flipped (mirror)
« Reply #3 on: January 02, 2014, 10:57:05 AM »
This is the area John was referring to.

Tweakie.
PEACE
Re: The image gets flipped (mirror)
« Reply #4 on: January 02, 2014, 12:33:24 PM »
Okay!

So Dir LowActive X and Y should be red and then it should work fine?
And i Have a CNC3040 so i need only the X Z Y so it will work fine?

Thanx alot man!

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: The image gets flipped (mirror)
« Reply #5 on: January 02, 2014, 12:39:07 PM »
Quote
So Dir LowActive X and Y should be red and then it should work fine?

NO - that is not what John suggested - just change the existing state for your X axis.

Tweakie.


 
« Last Edit: January 02, 2014, 12:47:24 PM by Tweakie.CNC »
PEACE