Hello Guest it is October 14, 2019, 09:59:05 AM

Author Topic: Mach3 reload Question  (Read 1374 times)

0 Members and 1 Guest are viewing this topic.

Mach3 reload Question
« on: December 22, 2013, 09:57:26 AM »
I am having a "crash" problem with Mach3 (see previous post) so I decided to try a reinstall of Mach3. I have everything working but when I load the G Code into Mack3 it will only run just a few lines of the code then stops and the rest of the toolpath window is blank and the 'Black' window is not showing all of the toolpaths. If I look at the 'notepad' editor it shows all of the Gcode. I'm sure I have missed setting something in the program but I can't find the problem. Where might I find the setting to correct this? ??? ??? ???

Gene

Offline ger21

*
  • *
  •  6,288 6,288
    • View Profile
    • The CNC Woodworker
Re: Mach3 reload Question
« Reply #1 on: December 22, 2013, 11:24:44 AM »
You don't have your License file in the Mach3 folder.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Mach3 reload Question
« Reply #2 on: December 22, 2013, 01:09:29 PM »
ger21
I can't thank you enough for the help. Mack3 is working. NOW if it will only NOT "crash" I will be happy. At least until the next problem comes up with my CNC. :o  ;)