Here is the gcode:
( test )
( File created: sunnuntai, joulukuu 01, 2013 - 06:13 )
( for Mach2/3 from Vectric )
( Material Size)
( X= 200.000, Y= 150.000, Z= 10.000)
()
(Toolpaths used in this file:)
(Profile 1)
(Tools used in this file: )
(1 = Engrave {20' 0.02" Tip Dia})
N100G00G21G17G90G40G49G80
N110G71G91.1
N120T1M06
N130 (Engrave {20' 0.02" Tip Dia})
N140G00G43Z25.400H1
N150S8000M03
N160(Toolpath:- Profile 1)
N170()
N180G94
N190X0.000Y0.000F1200.0
N200G00X5.000Y5.000Z3.175
N210G1Z-0.200F480.0
N220G1X195.000F1200.0
N230G1Y145.000
N240G1X5.000
N250G1Y5.000
N260G00Z3.175
N270G00Z25.400
N280G00X0.000Y0.000
N290M09
N300M30