Im running all week making a owl project suddenly today all the previous code that ran fine yesterday is bad. Im using VCP and Cut3d. Zero the machine all manual jogging reflects the correct movement in scale everythings ok. Load up some new gcode from VCP and the numbers in mach 3 DRO jump to 300 moving the axis manually the 300 numbers stay in that scale feedrates jump to 2000. (Im thinking Im losing steps) I load up some old gcode from last summer and the numbers and DRO's jump back to normal single and double digital numbers. The machine cant be losing steps. Ive restarted rebooted everything removed replaced good mach3 config file. Thinking of reinstalling VCP and Mach 3 What is causing this software glitch?