Hello Guest it is September 19, 2019, 02:28:50 PM

Author Topic: RefAllHome vs motor tuning vs Homing/Limits  (Read 1629 times)

0 Members and 1 Guest are viewing this topic.

RefAllHome vs motor tuning vs Homing/Limits
« on: August 18, 2013, 11:03:29 PM »
HI ! I'm new here as with mach3 and found a relation between homing/Limits, Motor Tuning and RefAllHome.

when I press ' REFALLHOME '; I get no motor moving on individual axis if velocity value set to 30 or lower,but works fine over-it ...
- Same thing happen for homing/limit _ speed%  less then 15 ... is-it normal ?
 Someone can confirm this or explain me ?

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: RefAllHome vs motor tuning vs Homing/Limits
« Reply #1 on: August 19, 2013, 02:47:45 AM »
Attach your xml please and I will test with it.
Hood
Re: RefAllHome vs motor tuning vs Homing/Limits
« Reply #2 on: August 22, 2013, 12:49:39 PM »
I reviewed  my home/limit values and they were badly set cause
 all is working'  nickel ' with any velocity or acceleration values. The proof that Mach won't let me do wrong things.
 :o and thanks for this fast reply.