Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: BOLTBAG on August 18, 2013, 11:03:29 PM

Title: RefAllHome vs motor tuning vs Homing/Limits
Post by: BOLTBAG on August 18, 2013, 11:03:29 PM
HI ! I'm new here as with mach3 and found a relation between homing/Limits, Motor Tuning and RefAllHome.

when I press ' REFALLHOME '; I get no motor moving on individual axis if velocity value set to 30 or lower,but works fine over-it ...
- Same thing happen for homing/limit _ speed%  less then 15 ... is-it normal ?
 Someone can confirm this or explain me ?
Title: Re: RefAllHome vs motor tuning vs Homing/Limits
Post by: Hood on August 19, 2013, 02:47:45 AM
Attach your xml please and I will test with it.
Hood
Title: Re: RefAllHome vs motor tuning vs Homing/Limits
Post by: BOLTBAG on August 22, 2013, 12:49:39 PM
I reviewed  my home/limit values and they were badly set cause
 all is working'  nickel ' with any velocity or acceleration values. The proof that Mach won't let me do wrong things.
 :o and thanks for this fast reply.