Hi All
I want my rotary table to act as a pull roller to pull a paper roll through a set ditance.
Is it acceptable to change the motor settings to achive a 1" pull for 1degree dro readout,
I have done the calculations and I need to go from 66.666666 steps for normal 360deg rotation to 2748 for a 2.78" dia and 1" pull
2.78*3.142/360=.02426 for 1 deg (normal)
so 1" is 66.666666/.02426 or 2748 steps with approprate change to speed and accelaration
It seems to move the correct distance but are there any problems with this?
Graham