Hi, Psad

Hear is the latest LC, even though it says, N20 (Default Plasma Post), It post's g42 for me.

I used the Auto In-side out-side option, with plasma un selected.

N10 (File 375 chain chuteSINGLEDXF Test File )

N20 (Default Plasma Post)

N30 (File Posted in Mill Mode)

N40 (Thursday, March 01, 2007)

N50 G90

G80 G40 G91.1

N60 G0 Z0.0000

N70 G0 X1.6450 Y0.2579

N80 G0 Z0.1000

N90 M3 (PLasma On)

N100 G1 Z0.0000

N110 G42

N120 X1.6450 Y0.0000

N130 G2 X0.0945 Y0.8055 I-0.0000 J1.8950

N140 X0.0000 Y1.1044 I0.4255 J0.2990

N150 G1 Y2.6856

N160 G2 X0.0945 Y2.9845 I0.5200 J-0.0000

N170 X0.2125 Y3.1355 I1.5505 J-1.0895

N180 G1 X1.0163 Y4.1530

N190 G2 X1.6450 Y4.4850 I0.6287 J-0.4293

N200 X2.2737 Y4.1530 I-0.0000 J-0.7613

N210 G1 X3.0775 Y3.1355

N220 G2 X3.1955 Y2.9845 I-1.4325 J-1.2405

N230 X3.2900 Y2.6856 I-0.4255 J-0.2990

N240 G1 Y1.1044

N250 G2 X3.1955 Y0.8055 I-0.5200 J0.0000

N260 X1.6450 Y0.0000 I-1.5505 J1.0895

N270 G40

N280 G1 X1.6450 Y0.2579

N290 M5 (Plasma Off)

N300 G00 Z0.0000

N310 M5 M9

N320 X0.0 Y0.0

N330 G40 G80

M30

%

This one with out auto selected, with plasma un selected.

N10 (File 375 chain chuteSINGLEDXF Test File )

N20 (Default Plasma Post)

N30 (File Posted in Mill Mode)

N40 (Thursday, March 01, 2007)

N50 G90

G80 G40 G91.1

N60 G0 Z0.0000

N70 G0 X-0.2587 Y1.1073

N80 G0 Z0.1000

N90 M3 (PLasma On)

N100 G1 Z0.0000

N110 G42

N120 X0.0000

N130 Y1.1044

N140 G3 X0.0945 Y0.8055 I0.5200 J-0.0000

N150 X3.1955 Y0.8055 I1.5505 J1.0895

N160 X3.2900 Y1.1044 I-0.4255 J0.2990

N170 G1 Y2.6856

N180 G3 X3.1955 Y2.9845 I-0.5200 J0.0000

N190 X3.0775 Y3.1355 I-1.5505 J-1.0895

N200 G1 X2.2737 Y4.1530

N210 G3 X1.6450 Y4.4850 I-0.6287 J-0.4293

N220 X1.0163 Y4.1530 I-0.0000 J-0.7613

N230 G1 X0.2125 Y3.1355

N240 G3 X0.0945 Y2.9845 I1.4325 J-1.2405

N250 X0.0000 Y2.6856 I0.4255 J-0.2990

N260 G1 Y1.1073

N270 G40

N280 X-0.2587

N290 M5 (Plasma Off)

N300 G00 Z0.0000

N310 M5 M9

N320 X0.0 Y0.0

N330 G40 G80

M30

%

Seems to work Hear, Chip