Hello Guest it is March 29, 2024, 06:57:43 AM

Author Topic: Mach 3 configurations for Sherline Mill  (Read 2657 times)

0 Members and 1 Guest are viewing this topic.

Mach 3 configurations for Sherline Mill
« on: May 29, 2013, 02:01:30 PM »
Have a CNC Sherline Mill w/ 8760 controller and planning to use Mach 3, since I
already have the license that came with my Taig. Is there anybody that can assist
me as to what Ports & Pin Settings are require and what they are using with their
Sherline? Such as, motor output - input & output signals, etc. to configure it
properly. Your assistance would be appreciated! Thank you for sharing. PS

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Mach 3 configurations for Sherline Mill
« Reply #1 on: May 30, 2013, 09:28:10 AM »
You should find information about configuration on the Sherline's site. I think they have an Mach XML
file which you can download.

RICH