Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: peppermark on May 29, 2013, 02:01:30 PM
-
Have a CNC Sherline Mill w/ 8760 controller and planning to use Mach 3, since I
already have the license that came with my Taig. Is there anybody that can assist
me as to what Ports & Pin Settings are require and what they are using with their
Sherline? Such as, motor output - input & output signals, etc. to configure it
properly. Your assistance would be appreciated! Thank you for sharing. PS
-
You should find information about configuration on the Sherline's site. I think they have an Mach XML
file which you can download.
RICH