Hello Guest it is March 29, 2024, 07:36:41 AM

Author Topic: Home/Limits  (Read 22611 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Home/Limits
« Reply #10 on: April 16, 2013, 01:21:12 PM »
You are using a pirate licence.
Hood
Re: Home/Limits
« Reply #11 on: April 16, 2013, 01:31:31 PM »
Hi Bret
I've changed it to be linear.
New there was something I'd forget.
It works just the same - no change
Gary

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Home/Limits
« Reply #12 on: April 16, 2013, 01:34:54 PM »
The first thing you will want to do is get a legit copy and we will proceed from there.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Home/Limits
« Reply #13 on: April 16, 2013, 01:38:16 PM »
Hi Bret
The axis has been changed to linear (unchecked)
Machine works the same as before-no change
Gary

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Home/Limits
« Reply #14 on: April 16, 2013, 01:41:05 PM »
I will say it again in case you missed my previous post ;)

You are using a pirate licence.

Hood
Re: Home/Limits
« Reply #15 on: April 16, 2013, 01:41:20 PM »
Hi Hood
This is a copy I bought from the supplier of the driverboard.
He is selling packages....... driverboard, motors, power supply and a copy of Mach3.
Gary

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Home/Limits
« Reply #16 on: April 16, 2013, 01:42:52 PM »
And that copy is a pirate so if you bought in good faith I suggest you take it up with your supplier and seek a refund, you can then purchase a legitimate licence.
Hood
Re: Home/Limits
« Reply #17 on: April 16, 2013, 01:45:19 PM »
I do not run pirate copies of software by principle, therefore if this is so. I will rectify immediately and purchase my own licence.
Can I supply you details of the supplier????
Gary

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Home/Limits
« Reply #18 on: April 16, 2013, 01:47:53 PM »
Yes Gary, please provide information about the supplier.

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!
Re: Home/Limits
« Reply #19 on: April 16, 2013, 02:02:13 PM »
Hi Bret and Hood
I have just done a purchase of my own licence.
I suspect it will take around 24hrs to get licence file.

The supplier is as follows:
UniRobotics
512 GovnMbeki Ave
North End
Port Elizabeth
South Africa
Tel:+27414575808
muhammedmoh@gmail.com
http://unirobotics.co.za/

Regards
Gary
PS nail the bugger