Hello Guest it is March 28, 2024, 10:00:55 AM

Author Topic: Motor Trouble  (Read 13770 times)

0 Members and 1 Guest are viewing this topic.

Re: Motor Trouble
« Reply #30 on: April 10, 2013, 07:27:13 PM »
OK, if you would post that dxf we can see how it loads in LCam here and mght see what the problem is and maybe give you some guidance.
Russ
Re: Motor Trouble
« Reply #31 on: April 10, 2013, 07:44:08 PM »
Ah, I vaguely remember LCam not seeing a lot of text from cad.
Needs to be a stick font ... or, true type ... or something.
I don't completely recall.
Re: Motor Trouble
« Reply #32 on: April 10, 2013, 09:00:23 PM »
I hope I get this right?  here goes I'm sending you the .dxf file from bobcad that I saved as a .dxf file, then loaded to Lcam.  Thanks for your help Russ.

Jim
Re: Motor Trouble
« Reply #33 on: April 10, 2013, 09:35:47 PM »
I converted the TEXT to ENTITIES.
Try this one (your spacing is off a bit)

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: Motor Trouble
« Reply #34 on: April 10, 2013, 11:26:19 PM »
Here is another one you can play with using an .125" dia cutter.
RICH
« Last Edit: April 10, 2013, 11:28:42 PM by RICH »