Hello Guest it is March 06, 2026, 04:40:52 AM
Profile Guest
« previous next »
Pages: « 1 2 3 4   Go Down

Author Topic: Motor Trouble  (Read 35627 times)

0 Members and 1 Guest are viewing this topic.

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Motor Trouble
« Reply #30 on: April 10, 2013, 06:27:13 PM »
OK, if you would post that dxf we can see how it loads in LCam here and mght see what the problem is and maybe give you some guidance.
Russ
Logged

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Motor Trouble
« Reply #31 on: April 10, 2013, 06:44:08 PM »
Ah, I vaguely remember LCam not seeing a lot of text from cad.
Needs to be a stick font ... or, true type ... or something.
I don't completely recall.
Logged

Offline Navyboy007

*
  • 10 10
Re: Motor Trouble
« Reply #32 on: April 10, 2013, 08:00:23 PM »
I hope I get this right?  here goes I'm sending you the .dxf file from bobcad that I saved as a .dxf file, then loaded to Lcam.  Thanks for your help Russ.

Jim
Logged

Offline Overloaded

*
  • *
  • 4,923 4,923
Re: Motor Trouble
« Reply #33 on: April 10, 2013, 08:35:47 PM »
I converted the TEXT to ENTITIES.
Try this one (your spacing is off a bit)
Logged

Offline RICH

*
  • *
  • 7,427 7,427
Re: Motor Trouble
« Reply #34 on: April 10, 2013, 10:26:19 PM »
Here is another one you can play with using an .125" dia cutter.
RICH
« Last Edit: April 10, 2013, 10:28:42 PM by RICH »
Logged
Pages: « 1 2 3 4   Go Up
« previous next »