Hello Guest it is March 28, 2024, 12:07:55 PM

Author Topic: Macro doesn't change Feedrate  (Read 2740 times)

0 Members and 1 Guest are viewing this topic.

Macro doesn't change Feedrate
« on: March 23, 2013, 03:42:02 PM »
Hi all,

I am setting up a bed-type tool changer where I need the spindle to go down to a set Z-height, then move Y+ to put the tool away.  I have the macro all finished (Actually I found it 99.9% finished online) but I can't set the feed to be nice & slow when it puts the tool away.  I can't see the error, what am I missing?  Macro attached.

tx,

dh
Re: Macro doesn't change Feedrate
« Reply #1 on: March 23, 2013, 04:11:17 PM »
The G00's are modal.
Looks like you have no G1's prior to the F entries.

Russ
Re: Macro doesn't change Feedrate
« Reply #2 on: March 23, 2013, 11:43:53 PM »
!!!! Awesome.  Thanks!
Re: Macro doesn't change Feedrate
« Reply #3 on: March 24, 2013, 04:19:23 PM »
Glad it was that simple .... enabling me to help.
Regards,
Russ