Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: dec@rocketmail.com on March 23, 2013, 03:42:02 PM

Title: Macro doesn't change Feedrate
Post by: dec@rocketmail.com on March 23, 2013, 03:42:02 PM

Hi all,

I am setting up a bed-type tool changer where I need the spindle to go down to a set Z-height, then move Y+ to put the tool away.  I have the macro all finished (Actually I found it 99.9% finished online) but I can't set the feed to be nice & slow when it puts the tool away.  I can't see the error, what am I missing?  Macro attached.

tx,

dh

Title: Re: Macro doesn't change Feedrate
Post by: Overloaded on March 23, 2013, 04:11:17 PM

The G00's are modal.
Looks like you have no G1's prior to the F entries.

Russ

Title: Re: Macro doesn't change Feedrate
Post by: dec@rocketmail.com on March 23, 2013, 11:43:53 PM

!!!! Awesome.  Thanks!

Title: Re: Macro doesn't change Feedrate
Post by: Overloaded on March 24, 2013, 04:19:23 PM

Glad it was that simple .... enabling me to help.
Regards,
Russ