Hello Guest it is March 28, 2024, 03:06:00 PM

Author Topic: NFS Turn in version 57  (Read 4050 times)

0 Members and 1 Guest are viewing this topic.

Offline m4uk

*
  •  38 38
    • View Profile
NFS Turn in version 57
« on: March 01, 2013, 11:24:42 AM »
After programming any of the wizards and clicking the Do it button I cant see a graphical representation of the shape I should be cutting. I get the green cut lines drawn as the code runs but there is no shape to see if I have programmed it right.

Is there a way of making this work?

Thanks
Re: NFS Turn in version 57
« Reply #1 on: March 07, 2013, 12:13:20 PM »
 Hi m4uk,
i think this is an issue in .057 Whats happen is that the displayed toolpath  is shiftet by the amount of the fixture or G52.
e.g. in G54 . When all  set to 0 then its is shown ok. That does not happen in .062

Alex

Offline m4uk

*
  •  38 38
    • View Profile
Re: NFS Turn in version 57
« Reply #2 on: March 11, 2013, 05:34:49 AM »
If I swap to 62 will the turn wizards work OK?

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: NFS Turn in version 57
« Reply #3 on: March 11, 2013, 07:23:58 AM »
I dont have an issue with 057 and the NFS wizards or general G Code showing in the toolpath.
Maybe attach your xml and I will see what its like here.
Hood
Re: NFS Turn in version 57
« Reply #4 on: March 11, 2013, 12:26:10 PM »
I have the same behavior here in 057.

Quote
If I swap to 62 will the turn wizards work OK?
yes.

Hood, did you try this?

G52 Z50
... your code here
...
M30

Alex

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: NFS Turn in version 57
« Reply #5 on: March 11, 2013, 12:48:53 PM »
Do the wizards add a G52?

Regardless, I have just added a G52Z50 and again seems fine, see screenshot.
Hood
Re: NFS Turn in version 57
« Reply #6 on: March 11, 2013, 03:50:44 PM »
Just gone back to 057 and used a new xml
Put in 50 mm in g54 Fixture ( the same result like G52Z50 )
When you start the code You get this: ( see picture)

Quote
Do the wizards add a G52?
No. this was only for testing.

Alex

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: NFS Turn in version 57
« Reply #7 on: March 11, 2013, 05:23:19 PM »
Not really sure what you are meaning by "Put in 50 mm in g54 Fixture " If you are meaning you entered 50 into the Z DRO then I tried that here and again fine, not sure where the problem is coming from.
Hood
Re: NFS Turn in version 57
« Reply #8 on: March 11, 2013, 06:14:22 PM »
Quote
If you are meaning you entered 50 into the Z DRO
Yes.
Just tried 053. no probs there
also 066 062
looks like only 057 shows this ( here )  ???

I keep 062  :)

Alex