Hello Guest it is November 14, 2019, 12:11:44 PM

Author Topic: Will Mach3 work on a Windows8 machine?  (Read 8931 times)

0 Members and 1 Guest are viewing this topic.

Offline RICH

*
  • *
  •  7,370 7,370
    • View Profile
Re: Will Mach3 work on a Windows8 machine?
« Reply #10 on: January 21, 2014, 08:41:28 PM »
Thanks for the info on dual boot.
RICH

Offline ofg

*
  •  29 29
    • View Profile
Re: Will Mach3 work on a Windows8 machine?
« Reply #11 on: January 21, 2014, 10:25:48 PM »
Only way I have been able to run a second operating system on my win8  machine is to us an external hard drive and configure the bios to give the option for a different boot at start up. Its a hassle, but possible. Have to dis able signed driver verification process to be able to do it,I think. Pretty sure that was necessary for the uc100 anyway.  Windows 8 has been a slight pain but so far all my tech and programs for robotics and NC have been fine with it.