Hello Guest it is May 21, 2025, 01:10:30 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: RESET BUTTON ( First day with mach3 )  (Read 9945 times)

0 Members and 2 Guests are viewing this topic.

Offline troy freeman

*
  • 5 5
RESET BUTTON ( First day with mach3 )
« on: February 25, 2013, 02:19:21 PM »
RESET button will not reset. EXTERNAL E-STOP REQUESTED
Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
Re: RESET BUTTON ( First day with mach3 )
« Reply #1 on: February 25, 2013, 02:30:26 PM »
Do you have any switches or estop buttons wired up?

http://www.machsupport.com/docs/Mach3Mill_Install_Config.pdf

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline troy freeman

*
  • 5 5
Re: RESET BUTTON ( First day with mach3 )
« Reply #2 on: February 25, 2013, 02:32:41 PM »
NO

Quote from: Chaoticone on February 25, 2013, 02:30:26 PM
Do you have any switches or estop buttons wired up?

http://www.machsupport.com/docs/Mach3Mill_Install_Config.pdf

Brett
PLEASE HELP. RESET button will not reset. Status- External EStop Requested  
Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
Re: RESET BUTTON ( First day with mach3 )
« Reply #3 on: February 25, 2013, 02:45:24 PM »
Go to Config, ports and pins, input signals and see what the active state of estop is.  If you change it, can you reset mach?

You can not diasblae estop.

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline troy freeman

*
  • 5 5
Re: RESET BUTTON ( First day with mach3 )
« Reply #4 on: February 25, 2013, 03:08:09 PM »
I don't have any limits or e-stops wired up
Logged

Offline troy freeman

*
  • 5 5
Re: RESET BUTTON ( First day with mach3 )
« Reply #5 on: February 25, 2013, 03:11:27 PM »
Went to Config.,ports & pins. Tried changing it nothing happend
Logged

Offline Chaoticone

*
  • *
  • 5,624 5,624
  • Precision Chaos
Re: RESET BUTTON ( First day with mach3 )
« Reply #6 on: February 25, 2013, 03:39:39 PM »
Try setting the estop port and pin to 0.

Brett
Logged
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: RESET BUTTON ( First day with mach3 )
« Reply #7 on: February 25, 2013, 07:46:22 PM »
If you set the Estop input pin to active low, it should reset.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Pages: 1   Go Up
« previous next »