Hello Guest it is November 20, 2019, 02:24:41 PM

Author Topic: HELP HELP TO GET STARTED ON MOCK3 MILL  (Read 1857 times)

0 Members and 1 Guest are viewing this topic.

HELP HELP TO GET STARTED ON MOCK3 MILL
« on: January 15, 2013, 01:35:43 AM »
THANKS FOR LOOKING!!!!!!

I RECIENTLY PURCHASED MACH3.  I HAVE ONLY OPENED THE TRIAL VERSION AT THIS TIME.  WHEN I OPEN UP MACH3 MILL THE RESET BUTTON IS FLASHING AND A MESSAGE SAY THAT THE E-STOP IS ACTUATED.  I DO NOT HAVE THE SOFTWARE CONNECTED TO A MACHINE AND I HAVE NOT UNLOCKED THE DEMO VERSION WITH MY CODE.  I AM JUST TRYING TO PLAY AND LEARN THE PROGRAM.  SO FAR I CAN'T GET PAST THE E-STOP PROBLEM.

PLEASE HELP IF YOU CAN,  I WANT TO HAVE FUN WITH THE REST OF YOU GUYS


THANKS

HARRY

Offline Tweakie.CNC

*
  • *
  •  8,006 8,006
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: HELP HELP TO GET STARTED ON MOCK3 MILL
« Reply #1 on: January 15, 2013, 02:02:41 AM »
Hi Harry,

In Mach3 - Config / Ports & Pins / Input Signals - enable EStop and reverse the 'Active Low' setting. That should enable you to clear the condition.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline RICH

*
  • *
  •  7,371 7,371
    • View Profile
Re: HELP HELP TO GET STARTED ON MOCK3 MILL
« Reply #2 on: January 15, 2013, 06:27:09 AM »
Harry,
Tick the Emulated box also if not wired to a pin.
RICH
Re: HELP HELP TO GET STARTED ON MOCK3 MILL
« Reply #3 on: January 15, 2013, 01:21:03 PM »
THANKS

I AM ON A ROLL NOW

HARRY

Offline budman68

*
  • *
  •  2,360 2,360
    • View Profile
Re: HELP HELP TO GET STARTED ON MOCK3 MILL
« Reply #4 on: January 15, 2013, 01:37:52 PM »
Great, now if we can just figure out how to get your keyboard fixed as the CAPS button seems to be stuck?  ;D

Welcome to the forum ;)
Dave
----------------------------------------------------------------------
Just because I'm a Global Moderator, don't assume that I know anything !

Dave->    ;)