Hello Guest it is March 28, 2024, 11:20:05 AM

Author Topic: settings for eas m100/f controller  (Read 3210 times)

0 Members and 1 Guest are viewing this topic.

settings for eas m100/f controller
« on: November 15, 2012, 05:35:59 AM »
hi all new on here and just building a cnc router
and wondered if anyone can help with mach3 settings to drive the motors for eas mc100/f controller
thanks bru

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: settings for eas m100/f controller
« Reply #1 on: November 15, 2012, 01:39:59 PM »
Do you have any documentation? I did a quick search and looks like they use their own software but as I dont speak German that may not be the case.
Hood
Re: settings for eas m100/f controller
« Reply #2 on: November 15, 2012, 02:29:41 PM »
no docs , did have a floppy disc when i bought it about 3 years ago and did test run the motors but cant find now ,have been on the german site also and i couldnt understand either ,

Offline Tweakie.CNC

*
  • *
  •  9,196 9,196
  • Super Kitty
    • View Profile
Re: settings for eas m100/f controller
« Reply #3 on: November 16, 2012, 06:04:19 AM »
Hi Bru,

If you use the Google Chrome browser then that incorporates Google Translate which makes a near perfect job with the German language.

The EAS software downloads are here http://www.easgmbh.de/index.php?area=1&p=static&page=downloads

There are also pinout details for most models in their downloads section and you may also like to check out their forum for more information etc.

Tweakie.
PEACE
Re: settings for eas m100/f controller
« Reply #4 on: November 16, 2012, 03:01:29 PM »
thanks for that ,
found some settings and will give them a go