Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: bru5350 on November 15, 2012, 05:35:59 AM
-
hi all new on here and just building a cnc router
and wondered if anyone can help with mach3 settings to drive the motors for eas mc100/f controller
thanks bru
-
Do you have any documentation? I did a quick search and looks like they use their own software but as I dont speak German that may not be the case.
Hood
-
no docs , did have a floppy disc when i bought it about 3 years ago and did test run the motors but cant find now ,have been on the german site also and i couldnt understand either ,
-
Hi Bru,
If you use the Google Chrome browser then that incorporates Google Translate which makes a near perfect job with the German language.
The EAS software downloads are here http://www.easgmbh.de/index.php?area=1&p=static&page=downloads
There are also pinout details for most models in their downloads section and you may also like to check out their forum for more information etc.
Tweakie.
-
thanks for that ,
found some settings and will give them a go