Hello Guest it is July 19, 2019, 05:27:43 PM

Author Topic: settings for eas m100/f controller  (Read 2021 times)

0 Members and 1 Guest are viewing this topic.

settings for eas m100/f controller
« on: November 15, 2012, 05:35:59 AM »
hi all new on here and just building a cnc router
and wondered if anyone can help with mach3 settings to drive the motors for eas mc100/f controller
thanks bru

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: settings for eas m100/f controller
« Reply #1 on: November 15, 2012, 01:39:59 PM »
Do you have any documentation? I did a quick search and looks like they use their own software but as I dont speak German that may not be the case.
Hood
Re: settings for eas m100/f controller
« Reply #2 on: November 15, 2012, 02:29:41 PM »
no docs , did have a floppy disc when i bought it about 3 years ago and did test run the motors but cant find now ,have been on the german site also and i couldnt understand either ,

Offline Tweakie.CNC

*
  • *
  •  7,848 7,848
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: settings for eas m100/f controller
« Reply #3 on: November 16, 2012, 06:04:19 AM »
Hi Bru,

If you use the Google Chrome browser then that incorporates Google Translate which makes a near perfect job with the German language.

The EAS software downloads are here http://www.easgmbh.de/index.php?area=1&p=static&page=downloads

There are also pinout details for most models in their downloads section and you may also like to check out their forum for more information etc.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.
Re: settings for eas m100/f controller
« Reply #4 on: November 16, 2012, 03:01:29 PM »
thanks for that ,
found some settings and will give them a go