Hello Guest it is March 29, 2024, 09:22:45 AM

Author Topic: Radius Comp  (Read 4778 times)

0 Members and 1 Guest are viewing this topic.

Offline rcrabb

*
  •  146 146
    • View Profile
Radius Comp
« on: January 23, 2007, 09:29:48 AM »
My radius comp LED always on. I can't seem to get it turned off. I checked the XML and radius comp off is 1. I also made sure the LED on the screenset is asigned the correct OEMLED value. Any ideas????????????????????????
Ryan

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Radius Comp
« Reply #1 on: January 23, 2007, 09:41:46 AM »
Hey Ryan,
    Is it doing this while you have code loaded? Is there a G41 or G42 in your code?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline rcrabb

*
  •  146 146
    • View Profile
Re: Radius Comp
« Reply #2 on: January 23, 2007, 09:45:48 AM »
No code loaded. I even did A G40.
Ryan

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Radius Comp
« Reply #3 on: January 23, 2007, 09:53:41 AM »
In general config, ports and pins, mill options, is advanced compensation on in there?

Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline rcrabb

*
  •  146 146
    • View Profile
Re: Radius Comp
« Reply #4 on: January 23, 2007, 10:59:43 AM »
I turned it off and the radius comp LED is still on. Even resarted mach and did a G40.
Ryan

Offline Chaoticone

*
  • *
  •  5,624 5,624
  • Precision Chaos
    • View Profile
Re: Radius Comp
« Reply #5 on: January 23, 2007, 11:10:46 AM »
What version of Mach are you running Ryan? I will do some test tonight.


Brett
;D If you could see the things I have in my head, you would be laughing too. ;D

My guard dog is not what you need to worry about!

Offline rcrabb

*
  •  146 146
    • View Profile
Re: Radius Comp
« Reply #6 on: January 23, 2007, 01:47:01 PM »
2.0.038
Ryan