Hello Guest it is March 28, 2024, 10:44:39 AM

Author Topic: Mach3 Duplicating line 150 four times.  (Read 2585 times)

0 Members and 1 Guest are viewing this topic.

Mach3 Duplicating line 150 four times.
« on: July 11, 2012, 02:28:56 PM »
Hi,

I'm running into a problem where everything past line 150 of my gCode is being cut-off(not viewable in the mach gcode cycle view) however whatever is line 150 in my g-code seems to be duplicated four times in machs gcode window however it isn't in the actual .tap file

Anyone run into this before?

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Duplicating line 150 four times.
« Reply #1 on: July 11, 2012, 02:59:25 PM »
I presume this is a lathe and you are hitting the max line count of the demo. On a mill it is 500 lines before you hit the max line count of the demo.
Hood
Re: Mach3 Duplicating line 150 four times.
« Reply #2 on: July 11, 2012, 03:08:26 PM »
How do I configure a license, by simply placing it into the Mach3 directory? My Mach does state that it is licensed.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Mach3 Duplicating line 150 four times.
« Reply #3 on: July 11, 2012, 03:11:18 PM »
Thats all you need to do so not sure why you have hit the line limit then.
If you attach your xml and your code I will see if I can replicate the problem here and hopefullt find the issue.
Hood
Re: Mach3 Duplicating line 150 four times.
« Reply #4 on: July 11, 2012, 03:16:04 PM »
Hi,

After doing a fresh reboot the problem fixed itself, thanks!

Thats all you need to do so not sure why you have hit the line limit then.
If you attach your xml and your code I will see if I can replicate the problem here and hopefullt find the issue.
Hood