Hello Guest it is February 28, 2021, 08:49:19 PM

Author Topic: hexapod  (Read 2824 times)

0 Members and 1 Guest are viewing this topic.

hexapod
« on: January 05, 2007, 06:31:01 PM »
  I am considering building a hexapod machine (stewart platform). Is there any way to use Mach to run one?

Offline Graham Waterworth

*
  • *
  •  2,274 2,274
  • Yorkshire Dales, England
    • View Profile
Re: hexapod
« Reply #1 on: January 06, 2007, 06:32:04 AM »
If you are talking about this type of setup, NOT A CHANCE.

Graham.
Without engineers the world stops
Re: hexapod
« Reply #2 on: January 06, 2007, 01:40:31 PM »
not a chance until Art and Brian get to implementing inverse kinematics.  ;)
Regards
Fernando
Re: hexapod
« Reply #3 on: January 06, 2007, 06:33:23 PM »
Well if we get a free day we will look into it ;)
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com