Hello I'm very new on this forum and indeed to the world of cnc Routers
My name is Lou and I have had a couple of post regarding my problem with jogging, however for some reason
I can't seem to be able to post on that thread, so i have started a new thread.
I purchased a wgit 6040 cnc machine on e-bay, I have purchase Mach3 soft ware and a second hand computer with XP windows,
so far so good.
I then proceeded to configure the software to the specifications in the manual supplied with the machine.
I have configured the soft are as as per the attachments.
Now My problem is this when I push my arrow keys my DRO's indicate movement . All okay to this stage.
Next I turn on my driver and try to jog the axis on the machine, movement is indicated on the DRO'S but I get no movement out of the machine on any of the axis,
all I get is a grinding sound from my z axis motor as if its trying to move but its not able to or something is holding it back.
Please advise me, if should be doing something else or am I doing something that is creating my problem.
Regards,
Lou