Hello Guest it is September 17, 2019, 08:18:42 PM

Author Topic: G73 Pullback setting  (Read 2003 times)

0 Members and 1 Guest are viewing this topic.

Offline BR549

*
  •  6,887 6,887
    • View Profile
G73 Pullback setting
« on: September 09, 2011, 01:32:15 PM »
Could someone verify that the G73 pullback setting is NOT being saved in the XML when you change it .

Config , port/pins, mill options, lower center of window.

Thanks (;-) TP

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: G73 Pullback setting
« Reply #1 on: September 09, 2011, 02:11:35 PM »
I am sure I have seen mention of that before and have just confirmed it is the case.
Hood
Re: G73 Pullback setting
« Reply #2 on: September 10, 2011, 06:44:57 PM »
It is not saved. It looks like the XML file is updated with the value 0.1 when you exit Mach3.