Hello Guest it is March 28, 2024, 07:55:44 AM

Author Topic: Uploads from Lazycam  (Read 2654 times)

0 Members and 1 Guest are viewing this topic.

Uploads from Lazycam
« on: July 10, 2011, 08:16:47 PM »
Uploading from Lazycam to MACH3 has gone haywire. Any DFX files I try to convert to G Codes using Lazycam are not fully loading into MACH3. In fact they only load to 250N and then stop, in all cases. Even older files that were already converted to G Codes only load to 250N. Any program less than 250N load fine. I purchased MACH3 from Artsoft and it is a licensed version. Why would this all of a sudden begin to happen? It worked last Thursday, July 7, but has not worked since. I completely deleted the MACH3 and Lazycam programs and reloaded. Other than IE there are no other programs loaded on this computer.  Any ideas?

Offline ger21

*
  • *
  •  6,295 6,295
    • View Profile
    • The CNC Woodworker
Re: Uploads from Lazycam
« Reply #1 on: July 10, 2011, 08:38:31 PM »
Quote
I completely deleted the MACH3 and Lazycam programs and reloaded.

Sounds like you deleted the license file.
If you go to Help>About, you should see you're name. If not, the license file is missing. You'll need to copy it back into the Mach3 folder.
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Re: Uploads from Lazycam
« Reply #2 on: July 11, 2011, 07:27:55 AM »
My name is there, and the MACH3 opens with "Licensed to Peter..................."