Update #3: ::sigh:: OK, so it was not the size wire though I feel more comfortable with the larger gauge wire. I switched ports that the signals are coming out of and that did fix some of the problem. So here's whats going on now. When jogging at 30% (which I'm not sure that means anything to anybody) all three motors jog wonderfully. However when I plug in a Gcode, the motors sound like a 30cal machine gun going off and is awfully loud. Now, the Gcode I'm running looks like a tomb stone and It starts on the round side of it so I don't know if it smooths out once I get to the flat edges however given how loud these are I'm not sure I want to. So I'm googling like crazy to find a solution to this now... gotta love trouble shooting...
Ok Now here's my question, What is your dip switches on the motor controllers set at? I have 1-8 dip switches and all but 2 are up, so that should give me 3.0amp at 1 micro step. I'm thinking about changing it to 1/2 micro step but I wanted to hear what someone else had first
That is all for now
Thanks again for helping me get this far,
-Brian
ps after reading over some earlier posts of mine I apologize for my awful proof reading (or lack there of )