Hello Guest it is March 29, 2024, 05:35:30 AM

Author Topic: mach3 turn spindle dro not working, spindle speed changing while jogging  (Read 34826 times)

0 Members and 1 Guest are viewing this topic.

Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #60 on: December 21, 2020, 03:50:34 AM »
Hello

Please, could you explain to me what difference you mean Diameter mode vs radius mode?
Where/how I can set this modes?
I'm running  R3.043.022

Thanks

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #61 on: December 21, 2020, 03:54:52 AM »
Config -> Port's&Pin's -> Turn Options -> X- Mode

do i realy have to explain the difference between Diameter and radius for a lathe user?
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #62 on: December 21, 2020, 04:02:02 AM »
Thanks

Sorry, I'm not real lathe user... I deal more with milling and, above all, with the retrofitting of machines.
I assume there is a difference in moving along the X axis.
I have a problem with the Z-axis ...

To this day, I have not encountered such problems ...

Offline TPS

*
  •  2,501 2,501
    • View Profile
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #63 on: December 21, 2020, 04:04:53 AM »
try to run .062

if i have a look to the Mach3 Changelog

https://www.machsupport.com/wp-content/uploads/2013/04/Changelist90.txt

a lot of changes for threading have been made after .022
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #64 on: December 21, 2020, 04:09:33 AM »
Thanks

I will try and report the result ..

Offline RICH

*
  • *
  •  7,427 7,427
    • View Profile
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #65 on: December 21, 2020, 06:11:06 AM »
MojsterMiha,

I'm running  R3.043.022
No wonder your having problems as threading was broke in that era of versions. Install / upgrade to
.062 and the problem should go away.

RICH
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #66 on: December 21, 2020, 06:19:32 AM »
Thanks
I will do it. 
I have used an old computer with already installed and licensed MACH3 - removed from old milling machine.
On milling machine it was all OK and I did not upgrade MACH3 - my bad..

Thanks again
Re: mach3 turn spindle dro not working, spindle speed changing while jogging
« Reply #67 on: January 13, 2021, 11:22:24 AM »
Finally succeeded to upgrade MACH3 to .063 version.

It works great  :)
The threads are as they actually should be.
Thank you all for your patience and all your help.