Hello Guest it is November 14, 2019, 10:09:53 PM

Author Topic: Arrow key worked now they don't  (Read 2070 times)

0 Members and 1 Guest are viewing this topic.

Arrow key worked now they don't
« on: February 14, 2011, 08:08:14 PM »
Hello all,

I'm very new to the CNC world so for give my ignorance. I set Mach 3 up as the tutorials show. I loaded my first "G" Code and turned the Plasma on and made a part. After doing this the Arrow keys no longer work to jog the X and Y axis I can use the MPD buttons to move the axis but not the arrow keys. Any Ideas what the heck I screwed up. One other issue I am having is that Mach3 seems to forget the soft limits and over run. Could some of this be my motor drivers.

Any help would be appreciated.

Thanks