Hello Guest it is August 04, 2020, 10:50:59 AM

Author Topic: NEMA 23 and 34 motor mount G-code  (Read 3232 times)

0 Members and 1 Guest are viewing this topic.

NEMA 23 and 34 motor mount G-code
« on: February 05, 2011, 07:05:55 PM »
Does anyone have g-code for cutting NEMA 23 and NEMA34 motor mounts? This would cut a recessed circle and the four mounting holes.

thanks,
-jim

Offline DaOne

*
  •  236 236
    • View Profile
Re: NEMA 23 and 34 motor mount G-code
« Reply #1 on: February 05, 2011, 11:22:45 PM »
If you can provide me with a dimensioned drawing of what you want and the tooling your using I can put it into g-code for ya.

Offline Tweakie.CNC

*
  • *
  •  8,388 8,388
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: NEMA 23 and 34 motor mount G-code
« Reply #2 on: February 06, 2011, 02:19:21 AM »
This sounds like it could be an ideal job for the wizards already built into Mach.
It does not have to be all done as one file as long as the origin is the same you could use two or three programs with tool change in between as necessary.

Tweakie.
KEEP SAFE !