Hello Guest it is August 22, 2019, 10:21:59 AM

Author Topic: IM NEW USER FOR MACH 3 CONTROLLER  (Read 2244 times)

0 Members and 1 Guest are viewing this topic.

IM NEW USER FOR MACH 3 CONTROLLER
« on: October 22, 2010, 03:51:12 AM »
hi im new to MACH 3  controller users , i neet to knoe if i purchase the controller for plasma & oxy cutting machine i can directly use the controller or i need to do any modifications in contriller ?
and what are the modifications need to be done ,step by step procedures ,please
which controller is suitable for plasma and oxy cutting machine LASY CAM /MACH 3

Offline Tweakie.CNC

*
  • *
  •  7,885 7,885
  • Super Kitty
    • View Profile
    • Tweakie.CNC
Re: IM NEW USER FOR MACH 3 CONTROLLER
« Reply #1 on: October 22, 2010, 04:09:52 AM »
Hi,

It is not necessary to make multiple postings of the same subject on this forum. In fact it probably has the reverse effect to what you require.

Tweakie.
Success consists of going from failure to failure without loss of enthusiasm.  Winston Churchill.

Offline Hood

*
  •  25,849 25,849
  • Carnoustie, Scotland
    • View Profile
Re: IM NEW USER FOR MACH 3 CONTROLLER
« Reply #2 on: October 22, 2010, 05:05:49 AM »
Without knowing the hardware you have/intend to use its impossible to say how much work would be involved in wiring them up to Mach.
If they are Step/Dir drives then it will be easy enough, if they are analogue then you would need to use something like DSPMC, Galil or K-Flop.
Hood