Dave,
I'm having a problem with my feedrate not acting right. I was using beta_5 and all was good. I changed to beta_9 and Mach 3.043.019 and my Feedrate within the Gcode doesn't always work properly. F3 runs 9ipm, F20 runs 20ipm, F3 at 30% runs about 3ipm, F20 about 6ipm. I looked to see what settings have been changed but can't find any. 1 out of 10 or 15 times F3 does run 3ipm and oddly F20 runs 60ipm! Something strange is going on. MDI seems to always be accurate. any suggestions?
T. Byrd