Hi folks,
Quick question. The issue may or may not be with Mach3. (version download / installed May 2010 running in WinXP SP2).
When I press the Ref All button, all 3 axis move to their respective home position and move off the switch a small amount. The Z axis moves enough to reverse state of the M3Home switch (LED is off on the diagnostics screen). The X and Y LED's are still active even though a slight move occurred off the limit switch. If I jog further in both X & Y the LED's will change state. Soft Limits is engaged and working.
I will say that the distance moved off the switch in Z is greater than the distance moved off the X & Y switches.
Everything else in Mach3 seems to work regardless of this issue, just something that bothers me. Is there a setting that I / OEM missed to setup?
Any thoughts or suggestions.
Thanks,
John