Hello Guest it is April 18, 2024, 08:45:18 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: How do you set the home position and do a simple 2d profile  (Read 5105 times)

0 Members and 1 Guest are viewing this topic.

Offline whatda?

*
  • 59 59
    • View Profile
How do you set the home position and do a simple 2d profile
« on: April 03, 2010, 03:23:36 AM »
Hi to all,

Just curious how we go about setting the home position with Lasyturn
and also how do we machine a simple profile without the tool going to
x0 and cutting of the stock at the end.

I have enclosed a picture of what I mean.
Tried so many things which didnt work.

So far excellent addon, simple and easy !  ;D

Any thoughts,
Thanks

Regards
Whatda?

Logged

Offline RICH

*
  • *
  • 7,427 7,427
    • View Profile
Re: How do you set the home position and do a simple 2d profile
« Reply #1 on: April 03, 2010, 08:21:46 AM »
WHATDA,
Attached is a rough draft of Appendix "F"  of the LazyTurn Manual which should answer most questions and then some.
You can't print the document but you can read it.

RICH
Logged

Offline W.Jansen

*
  • 119 119
    • View Profile
Re: How do you set the home position and do a simple 2d profile
« Reply #2 on: April 11, 2010, 12:36:10 PM »
Hay Whatda

Could you attach the dxf and the *.tap file

Greetings:
Willem
Logged
Pages: 1   Go Up
« previous next »