Hello Guest it is March 19, 2024, 05:06:08 AM

Author Topic: mach3 ssetup  (Read 5746 times)

0 Members and 1 Guest are viewing this topic.

Re: mach3 ssetup
« Reply #10 on: September 17, 2011, 12:20:38 PM »
the parts  is  40mm x 40mm  inside hole 30mm
 after i fix the   big problem   onli is problem  with one X axis
.
 parts cut out dimensions 40mm Y axis  hole 30mm  and X axis 40.20mm only the  X  AXIS  is problem
Re: mach3 ssetup
« Reply #11 on: September 17, 2011, 12:26:02 PM »
Who will help me set this MACH3

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: mach3 ssetup
« Reply #12 on: September 17, 2011, 02:44:08 PM »
Are your steps per unit correct?
Hood
Re: mach3 ssetup
« Reply #13 on: September 17, 2011, 07:19:21 PM »
i have  ste  to 400  and I lined up in a mach 3, but it's improved
Re: mach3 ssetup
« Reply #14 on: September 17, 2011, 07:31:06 PM »
i fix the  problem  thanks  hood  for  help  is work  perect  if i  cut 70mm x 40  hole  20mm  is ok perfect size  if i cut 40 x 30  hole 1  perfect   if i cut 340mm  x 140 hole  50mm  smole proble  it is 340.01  that is ok

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: mach3 ssetup
« Reply #15 on: September 18, 2011, 03:56:00 AM »
Glad to hear it :)
Hood