Hello Guest it is March 28, 2024, 01:09:11 PM

Author Topic: Program start from a tool number  (Read 2414 times)

0 Members and 1 Guest are viewing this topic.

Program start from a tool number
« on: February 12, 2010, 12:17:38 PM »
Is there a way to start running a gcode program by specifying a tool number example "tool breakage"
because when i scroll down thru the gcode window and select "run from here" button in mach it ask for a prep move that is even relevant to the part
Adam

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: Program start from a tool number
« Reply #1 on: February 12, 2010, 02:47:57 PM »
Sorry dont follow what you are asking, can you try and explain a bit more please.
Hood

Offline bowber

*
  •  216 216
  • Kirkby Stephen,Cumbria, UK
    • View Profile
Re: Program start from a tool number
« Reply #2 on: February 13, 2010, 06:51:46 AM »
I think Adam is asking if you can "run from here" without the prep move.

Steve