Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Cncman2nv on February 12, 2010, 12:17:38 PM
-
Is there a way to start running a gcode program by specifying a tool number example "tool breakage"
because when i scroll down thru the gcode window and select "run from here" button in mach it ask for a prep move that is even relevant to the part
-
Sorry dont follow what you are asking, can you try and explain a bit more please.
Hood
-
I think Adam is asking if you can "run from here" without the prep move.
Steve