Hello Guest it is March 28, 2024, 01:52:07 PM

Author Topic: 1-Port Parallel PCI Card  (Read 19607 times)

0 Members and 1 Guest are viewing this topic.

Re: 1-Port Parallel PCI Card
« Reply #50 on: December 01, 2009, 05:37:05 PM »
yeah many many! Praise Microsoft!
Re: 1-Port Parallel PCI Card
« Reply #51 on: December 01, 2009, 05:37:37 PM »
Found xml thingy!
Will try to attach
Re: 1-Port Parallel PCI Card
« Reply #52 on: December 01, 2009, 05:50:56 PM »
not sure this is my custom profile..

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: 1-Port Parallel PCI Card
« Reply #53 on: December 01, 2009, 05:55:52 PM »
Ok will have a look in a few mins but just in case you misunderstood regards the patch, it is on the Mach downloads page and is needed I think  for using Mach under Vista.
Hood

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: 1-Port Parallel PCI Card
« Reply #54 on: December 01, 2009, 05:58:03 PM »
If that was the xml you had loaded when testing the Dir pin for voltage it is Pin 6 you need to test.
Hood

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: 1-Port Parallel PCI Card
« Reply #55 on: December 01, 2009, 06:00:21 PM »
Also, have you got an E-Stop switch fitted? if not then you will either need to short pin 13 to Gnd or change the active state of the E-Stop in ports and Pins, Inputs. If you dont do that then you will not be able to get Mach out of Reset and thus wont be able to jog.
Hood
Re: 1-Port Parallel PCI Card
« Reply #56 on: December 01, 2009, 06:08:59 PM »
No i've looked that must be the one for the non custom profile (which has pin 6 enabled). I'll try and find the correct one and attach tomorrow. I've gotta get some sleep now.. brain hurts.
No. Thats not it I auto toggled all pins preventing reset.
Thanks again Jolyon
Re: 1-Port Parallel PCI Card
« Reply #57 on: December 01, 2009, 06:11:55 PM »
also Mach definately jogging, numbers go up and down! Goodnight and cheers:)

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
    • View Profile
Re: 1-Port Parallel PCI Card
« Reply #58 on: December 01, 2009, 06:53:13 PM »
Have you run the driver test?
Hood
Re: 1-Port Parallel PCI Card
« Reply #59 on: December 02, 2009, 01:56:11 PM »
Heya Hood

Driver test?