Hello Guest it is June 20, 2019, 04:24:56 AM

Author Topic: Kirans Wizard  (Read 1431 times)

0 Members and 1 Guest are viewing this topic.

Offline Fastest1

  •  927 927
  • Houston, TX
    • View Profile
Kirans Wizard
« on: October 23, 2009, 12:58:59 PM »
Last night after finding out my NFS wizards were unlicensed. I tried Kirans cicle cutting wizard. Everthing was going as planned (.250 2f.e.m., circle diameter 2.255, and .43 depth from Z0). I watched for many passes and then for no reason, machine was untouched, I had restarted mach fresh and only configured this wizard once for this hole/circle, and the cutter starts going across the inside of the circle (a previously uncut area). Is this normal? I checked my cv, it was on. It is abs in mode not inc. I noticed prior to this if I played with wizards a few times and loaded and removed gcodes without starting mach fresh, it seemed to have random  things happen, unexplained. This was all with air cuts. I thought I had associated it with not reopening mach fresh as that had corrected the cuts prior to this. Any ideas?
I want to die in my sleep like my grandfather, not like the passengers in the car! :-)