Hello Guest it is March 28, 2024, 07:29:46 AM

Author Topic: Where is the Driver Test Utility located?  (Read 2985 times)

0 Members and 1 Guest are viewing this topic.

Offline Jim

*
  •  16 16
    • View Profile
Where is the Driver Test Utility located?
« on: August 26, 2006, 06:07:43 PM »
Where is the Driver Test Utility located? I've looked around the FTP site, with no luck. I've installed Mach3 and am trying to go through the tuning process. I'm having a problem with the Taig CNC Z axis. A rapid up, fails 2 out of 3 times. I call for 1" move, and the head raises about an 1/8th inch then buzzes. Of course the following downward movement wants to bury the tool into the stock.

Jim
Re: Where is the Driver Test Utility located?
« Reply #1 on: August 26, 2006, 06:11:39 PM »
In the main Mach3 directory on your hard drive.  Assuming of course you are using Mach3.

Offline Jim

*
  •  16 16
    • View Profile
Re: Where is the Driver Test Utility located?
« Reply #2 on: August 26, 2006, 06:15:52 PM »
Doh!

Thanks