Hello Guest it is March 29, 2024, 01:45:44 AM

Author Topic: Using USB connections  (Read 3065 times)

0 Members and 1 Guest are viewing this topic.

Using USB connections
« on: August 25, 2006, 08:01:50 PM »
I want to go from a USB output to a DB9 connector. Should I assign the outputs on pins 1-9?
Thanks,
-jim
www.ctpyro.com
Re: Using USB connections
« Reply #1 on: August 25, 2006, 08:27:46 PM »
You can't do that :( if you need more IO you will need to get a 2nd printer port

sorry
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com