Hello All,
I ran into the same fault codes yesterday.
I managed to generate a G-code with Solidcam after many, many tries.
First I had to find a solution for two fault messages from Solidcam itself. Thanks to CNCzone.com.
As a first solution I deleted the offending lines and Mach3 produced my simple design on my Emco Compact5 CNC lathe.
That worked.
I also encountered the long distance that the tools is set . G0 x150 z200.
Why Sc does this I do not know.
Also the Feed is set at F0.3 , way too slow and I changed that to F100. Exactly fine for my little lathe.
So, there is some more fiddling to be done with Solidcam.
Thanks for all the info.
Jos
Holland
mraven.com