Thanks GawnCA,
it is 34 " wide with a nema 34 on the Y and a 23 on the Z from keling,,with 5/8" roton ballscrews and nuts , They have a good deal now for the ballscrews 10 bucks a foot and 23 for the nuts for the 5/8" ballscrews, gonna be getting a few more for the X axis next week...And I am looking for one more piece of HIWIN HGH rail to match the one I got on ebay but have not found them , just new at automation4less surplus, but a new peice of rail cost more than I paid for the 58 1/2" rail and 4 linear bearings I found on ebay, so still gonna give it a few weeks until I have the rest of the table built.. And Aurturo from CNC4PC live just a mile from me so we are going to get together to upgrade my controller here in a few weeks.. Cant wait to have it cutting..The first one I built was out of MDF and acme thread and I could not get the backlash down for nothin and the flex was horrible..
Thanks
Gary