Hello Guest it is June 05, 2020, 07:43:53 PM

Author Topic: is there a way to reconfigure backlash screen  (Read 1556 times)

0 Members and 1 Guest are viewing this topic.

is there a way to reconfigure backlash screen
« on: April 05, 2009, 10:49:38 AM »
I know my machine needs repair but it isn't broken yet. I am only loosing .003 in one direction on the x axis, and I was wondering if you could have a forward and reverse setting for each axis. For example.

x axis      0      0.003
y axis      0      0
z axis      0      0

That way I can at least save some money up to repair the machine.

David

BClemens

*
Re: is there a way to reconfigure backlash screen
« Reply #1 on: April 05, 2009, 10:57:32 AM »
Compensate for backlash in: 'configure' -'backlash' - enable check-box. That is basically for total backlash - both directions.

Bill C