Hello Guest it is June 17, 2019, 09:31:08 PM

Author Topic: Subroutines broken in 42.023  (Read 2832 times)

0 Members and 1 Guest are viewing this topic.

Offline simpson36

*
  •  1,374 1,374
    • View Profile
Subroutines broken in 42.023
« on: March 23, 2009, 09:09:04 AM »
Ignores G0 move on next executed line after M99

Online Graham Waterworth

*
  • *
  •  1,857 1,857
  • Yorkshire Dales, England
    • View Profile
Re: Subroutines broken in 42.023
« Reply #1 on: March 27, 2009, 10:18:55 AM »
Hi,

post your code as I am not sure what your problem is.

Graham
Never give up, time will pass, the cloud will clear, the sun will shine once more.

Offline simpson36

*
  •  1,374 1,374
    • View Profile
Re: Subroutines broken in 42.023
« Reply #2 on: March 27, 2009, 03:57:22 PM »
Attached is one of the programs that is effected.

At return from sub, next move commandis ignored.

Works fine in .021
Re: Subroutines broken in 42.023
« Reply #3 on: March 30, 2009, 05:22:35 AM »
It is also broken in Mach3 R3.042.024.

Here is a program that the Z instruction after the macro (line 44 is the first) return doesn't work repeatedly and so I was cutting metal when it shouldn't.

Curt

Online Graham Waterworth

*
  • *
  •  1,857 1,857
  • Yorkshire Dales, England
    • View Profile
Re: Subroutines broken in 42.023
« Reply #4 on: March 30, 2009, 01:14:28 PM »
Try using R3.043.000

Graham
Never give up, time will pass, the cloud will clear, the sun will shine once more.

Offline simpson36

*
  •  1,374 1,374
    • View Profile
Re: Subroutines broken in 42.023
« Reply #5 on: March 30, 2009, 03:34:11 PM »
If I remeber correctly, .43 broke the 4th axis.

I posted that some time ago, but now I cannot find the thread.

Since there is no version change and it is still  .43.00, I assume it is still bropken?

It seemed the thrust behind 43.023 and .24 was to fix threading. Does threading work in 43.00?